The hang clean, however, is a highly technical movement that takes A LOT of practice to really get down. Follow the advice given here by Zack Telander (@coach_zt), Olympic weightlifting competitor and coach, to master the hang clean and use it to gain muscle, power, and total-body strength.

What Are Hang Cleans and What Are The Benefits of Doing Them?

(See 00:25 in the video above)

In the full clean exercise, as done in the sport of weightlifting, you start with the bar on the floor and heave it up to shoulder level (called the “front rack” position). In the hang clean, you start the movement already standing straight and then bend your hips back to lower the bar—usually to just below the knees. From there, you explosively extend your hips, knees, and ankles to get the bar up to the rack position. This is done right after you lower the bar, so the stretch reflex kicks in and helps you power the bar up. Because you start in a stronger position, says Telander, the hang clean is a little easier to control than the regular clean, and therefore a better move for beginners to work on.

The hang clean offers numerous benefits. The explosive extension of the hips, knees, and ankles (called “triple extension” by coaches) happens almost simultaneously, producing tremendous power. A football player’s ability to charge forward out of a three-point stance, a basketball player’s jump shot, and a track star’s sprint all owe their power to triple extension. Unsurprisingly, the hang clean almost always figures into the workouts of these types of athletes.

The hang clean also recruits pretty much every muscle you can think of, but particularly the glutes, hamstrings, calves, upper back, and core. Progressively loading the hang clean over time can get you big and strong and change your physique.

How To Properly Execute A Hang Clean

(See 01:23 in the video)

The hang clean is awesome… but it’s not as easy as doing a barbell curl or a dumbbell shrug. It’s an incredibly technical movement that’s going to require a lot of practice to do properly—so be patient. Telander recommends you break the hang clean down into its component parts and work them one at a time. Practice the following with an EMPTY barbell.

Part 1: The Front Rack

(See 01:40 in the video)

The first thing to familiarize yourself with is the front rack position—holding the bar at your collarbone/shoulder level. This is the last part of the clean movement—where the bar finishes—but Telander likes to drill it first because it’s the easiest part of the lift to get down. It also sets you up for presses and jerks, which you’ll want to progress to after you have the hang clean under your belt.

Step 1. Stand with your feet between hip and shoulder width and hold the bar at arm‘s length with your hands at shoulder width. Your hands should be about thumb length from the outside of your thighs. Now press the bar overhead.

Step 2. Lower the bar with control until it’s at shoulder level, and point your elbows forward as you bring it down. This should allow the bar to settle just above your clavicle in the front rack position. If you lack mobility in your wrists, upper back, or shoulders, you may have difficulty holding onto the bar. Your hands can open to allow you greater range of motion, but don’t let the bar roll all the way to your fingertips—you won’t be able to control it.

Repeat this motion for several reps and practice it for multiple sets. Your mobility should improve within a few sessions. When you’re confident in your front rack, move on to the next component.

Part 2: The Muscle Clean

(See 02:45 in the video)

The muscle clean is where you’ll work on popping the bar from your hips to your chest—the stage right before you finish in the front rack. It’s basically an upright row done with momentum.

Step 1. Start with the bar at arm’s length in front of you again.

Step 2. Row the bar straight up in front of your body, raising your elbows high and out to your sides. As the bar reaches your chest, push your elbows forward and under the bar so you end up in the front rack. Essentially, “as soon as you feel you can’t pull the bar any higher with the grip you’ve taken,” says Telander, “you’ll want to begin turning your elbows over.”

Be careful not to lift the bar too high so that it flops over and bounces into the front rack. You want to pull it fast, but don’t let momentum take control away from you.

Practice this for several workouts, and integrate it with the front rack. At this point, you’ll have two-thirds of the hang clean down pat.

Part 3: The Contact Drill

(See 03:50 in the video)

Now you’re ready to practice getting the bar in contact with your legs and beginning the explosion upward.

Step 1. From the same standing position, bend your knees slightly and then bend your hips in order to lower the bar to mid-thigh level.

Step 2. Let the bar drift away from your body and then, using only your arms, snap it back so it touches your thighs again. As soon as you feel it hit your thighs, extend your hips and knees and go into the muscle clean you learned in Part 2. You don’t have to raise the bar all the way up to your chest though. Keep the movement between your thighs and about sternum level so you can focus on that initial hip and knee drive. The bar should glide up in a straight line, just in front of your shirt.

When that feels natural, try integrating the contact drill with the full muscle clean and finishing in the rack position. Then, when that feels strong, you can begin to catch the bar in the front rack position by jumping and descending into a quarter-squat. As you come up in the muscle clean, use enough power so that your feet leave the floor and you come back down bending at the hips and knees to absorb the force.

Hang in there, no pun intended. You’ve got almost the entire hang clean movement now.

Putting It All Together

(See 04:40 in the video)

The hang clean can begin just above or below the knees, depending on how you want to implement it in your training. For those just learning the clean, Telander likes to begin from below the knee at about mid-shin height, as that’s the safest way to practice the hang clean and reinforces good technique.

Practice the integrated hang clean drills you’ve already worked on, but instead of beginning the contact drill with the bar drifting in front of you, you’ll begin with the bar in contact with your legs at mid-shin. Start from standing, take a breath in and hold it, and bend the hips and knees until the bar is low enough. As soon as you reach that position, begin extending your hips and knees and clean the bar to the front rack. Exhale, drop the bar back in front of you with control, and repeat.

When you feel good about your form, you can add weight to the bar. Start with 25-pound plates, and you may need to elevate the bar on some blocks or mats so that you can set up with the bar at mid-shin. When you work up to using 45s on each side, the bar will be high enough just sitting on the floor. (If you have rubber bumper plates, any weight you use will be the same diameter and therefore the same distance from the floor).

How To Choose The Right Weight For The Hang Clean (Plus, Sets and Reps)

(See 08:02 in the video)

The hang clean is meant to be loaded heavy, so you can build as much muscle and strength as possible. But when you’re new to the lift, you need to go light so you can master good technique. Start with no more than 45 pounds on each side (again, lighter weight with the use of bumper plates is even better, if you have access to them). “Go for 5–10 sets of 1–3 reps,” says Telander. As you get better, you can work up to sets of as many as 5 reps, but you should rarely go higher than that. The more reps you perform, the more fatigue you’ll accumulate, and fatigue causes form to break down and can lead to injury, or, at the very least, sloppy hang cleans that don’t have the desired training effect.

Five to 10 sets seems like a lot, doesn’t it? Remember, this is Olympic weightlifting, not bodybuilding, and the emphasis is on technique and power—not muscle failure. You want to do a fair number of sets to ingrain good form, so think of them as practice. A set of hang cleans should end when you feel you can’t do another rep with perfect form, not the point where you’re straining to even get the bar moving. It’s a different kind of training than most people are used to, and it requires a different mentality.

What Muscles Do Hang Cleans Strengthen?

(See 08:55 in the video)

The hang clean is truly a full-body movement, as it involves so many muscles to take the bar from near the floor up to your collarbone. With that said, weightlifters often sport impressive trapezius muscles, thick upper backs, and dense glutes and hamstrings. Beyond the changes you’ll notice hang cleans have on your physique, their main benefit will be to your athletic potential. Telander says hang cleans build the muscles and the neuromuscular coordination necessary to jump higher, run faster, and lift more weight, particularly on exercises that use similar body mechanics, such as the squat and deadlift.

How To Stretch Before Doing Hang Cleans

(See 12:45 in the video)

We mentioned above that the front rack position can be awkward for many people. The hang clean also demands a lot of mobility in the hips and hamstrings. Therefore, Telander recommends these two drills that can help open up the areas that allow you to control the bar better throughout the hang clean’s range of motion.

Front Rack Banded Stretch

(See 12:50 in the video)

Step 1. Grasp an elastic exercise band (preferably a loop band as opposed to a tube) with your right hand and stand on the other loop with your right foot.

Step 2. Get into the front rack position and then raise your arm overhead so your elbow points to the ceiling and the band pulls on your arm in a straight line from behind your back. Allow the band to stretch your arm—you should feel a strong pull through your triceps and back. Pull your ribs down so you don’t hyperextend your spine, and brace your core. Hold the stretch for 30–60 seconds, and then repeat for 2–3 sets, or until you feel that your front rack position has improved. Do the stretch on both sides.

Bodyweight RDL

(See 13:49 in the video)

Step 1. Stand with feet at hip width and bend your knees slightly.

Step 2. Push your hips back as far as you can while keeping a long spine from your head to your tailbone—don’t lose the arch in your lower back. You’ll feel a strong stretch in your hamstrings. Do 2–3 sets of 10–20 reps. You can also use the exercise band you had for the front rack stretch to increase the intensity: stand on the center of the band while holding a loop in each hand. Yet another option: use a kettlebell.

Hang Clean Alternative Exercises and Variations

(See 09:18 in the video)

If you’re having trouble with the hang clean, back off to a less complicated exercise that shares similar mechanics but is less technically demanding. The Romanian deadlift and kettlebell hang clean build strength and power in the hips and will help you get familiar with the hip extension movement you need to be proficient at hang cleans when you go back to them.

Romanian Deadlift (RDL)

(See 09:25 in the video)

See the description for the bodyweight RDL above. The exercise is essentially the same, but now you’ll add weight, performing the lift with a barbell. Perform 2–3 sets of 5–10 reps.

Kettlebell Hang Clean

(See 10:00 in the video)

While the kettlebell hang clean is easier to master than the barbell version, it offers a different kind of challenge and a unique array of benefits. You’ll use two kettlebells at once, which means your body will have to stabilize two weights independently, and this is helpful for simulating the chaos that comes in real-life sports play.

Step 1. Stand with feet outside shoulder width and hold a moderate-weight kettlebell in each hand.

Step 2. Bend your hips back and, when you feel a stretch in the hamstrings, explosively extend your hips and pull the kettlebells up in front of your torso. Drive your elbows back against your sides as you do this—this will help you avoid flipping the kettlebells over your wrists so they slam into the back of your forearms, a common (and painful) mistake. Then drive your elbows forward. The weights should end up just under your chin (basically the same rack position as in the barbell hang clean).

Perform 2–3 sets of 5–10 reps.

Tips On How To Avoid Mistakes and Getting Hurt

(See 11:10 in the video)

The hang clean isn’t any more dangerous than virtually any other barbell lift, but it can be trickier. You absolutely must pay attention to your form at all times. Telander says to think about the three parts to the lift that he described above as a spectrum—you’re free to go back and forth between them and revisit a section as needed when you recognize that one part needs work. “If you struggle with the full hang clean,” says Telander, “you might need to go back and work on the contact drill.” Likewise, if you feel off on your contact drill, go back and drill the muscle clean some more. Each part sets you up better for the one that follows it.

Telander also cautions not to think of the clean as a reverse curl with momentum—a very common mistake. You’re not heaving weight up with just your back and biceps. “Think ‘elbows high’ when you do the muscle clean,” he says, so you row the weight up rather than sling it.

It’s also a good idea to hire a coach to observe your form and correct it on the spot. USA Weightlifting can connect you with such a person (many CrossFit boxes have weightlifting-certified coaches as well). At the very least, video yourself so you can look at what you’re doing and gain awareness. Having a training partner is a good idea too.

Master another power-building clean variant with our guide to the One-Arm Kettlebell Clean exercise.

The post How To Do The Hang Clean Exercise Like A Pro appeared first on Onnit Academy.

What Is A Steel Mace?

(See 00:35 in the video above.)

We won’t sugarcoat it: the mace was invented to kill people. But it wasn’t long before folks realized that lifting one could help them get into great shape too.

The use of a mace dates back to the days when fitness was a fortuitous byproduct of training for war. More than 2,000 years ago, Hindu soldiers in India wielded maces that were nothing more than bamboo sticks with stones tied to the ends. One of their deities, Hanuman, was a monkey-man hybrid who carried a mace and, as the legend went, could lift the Himalayas with his hands. Called a “gada,” the mace was primarily used to help condition warriors for their combat training, which included wrestling, archery, and sword fighting.

“If we look back at various martial cultures,” says John Wolf, co-creator of Onnit’s unconventional training curriculum, “they all used some kind of mace.” Historical records indicate that different varieties of maces were present in India, and later Russia and Western Europe during the Middle Ages, as each culture experienced a time when the armor of its warriors became more advanced than the weaponry used against it.

As anyone who’s seen Braveheart or Robin Hood knows, maces evolved to where they had spikes on the ball end, and they helped turn the tide of many a war. But the gentler, more primitive models were never discarded as a tool used off the battlefield to get a great workout.

When you think about it, a steel mace is really just another barbell, albeit with a weight on only one end. They usually range from around seven pounds to 25 or more, and you can do everything with a steel mace that you ever learned to do with a barbell. And that’s just the beginning.

Performing classic strength exercises such as the squat, overhead press, Romanian deadlift, and bent-over row with a mace works all the same muscles that the barbell will, but with a bonus. The imbalance created by the load of the mace head (the ball at the top of the mace handle) will make it difficult to lift the mace evenly. It wants to pull you out of position, twisting you in the direction of the heavier end, so you have to work that much harder to keep the path of motion even—calling on your core, grip, and various stabilizer muscles to do so. Spend a few weeks doing these exercises with the mace and then see how you feel doing them with a regular barbell again. Don’t be surprised if you feel more stable and strong, and break strength plateaus shortly thereafter.

What Are The Benefits of Steel Mace Training?

(See 01:40 in the video.)

You don’t even have to work out with the mace, per se, to reap some benefits from it. The long lever that the handle creates makes it fantastic for increasing mobility. If you have tight shoulders and a rounded upper back, for instance, as a result of too much chest training and/or sitting at a desk in front of a computer for too long, try holding the mace behind your head with the mace head pointing to the floor. Swing it gently side to side to feel the mace gradually pull your shoulders into greater flexion, opening up your chest and stretching your thoracic spine. Many people find this helps relieve shoulder pain, and warms them up for an upper-body or pressing workout.

Rotational Strength

Once you’ve gotten a feel for the steel mace, you can begin to unlock its greatest potential—using it as a tool to train rotation. The fact is, most people’s training is limited to the sagittal movement plane. This means exercises where the trunk or limbs move forward and back, as in a bench press, curl, squat, deadlift, and running. Nevertheless, most of the movements we make in sports and everyday life aren’t that simple. They’re combinations of all three planes of motion—moving forward and back, side to side, and in rotation. With that in mind, doesn’t it make sense to train these movements in our workouts?

The steel mace facilitates the body’s ability to rotate—and resist rotation, when needed—more so than the kettlebell, steel club, or any other training implement.

It lends itself perfectly to performing chopping and paddling motions that make your shoulders, torso, and hips twist—something they can’t do as well or as safely with a barbell or other conventional equipment. The length of the mace handle is ultimately designed to be swung. Swinging the mace creates tremendous force—a force that threatens to knock you off balance and out of position unless you learn to control it. As a result, steel mace training is one of the best ways to instill good posture and movement mechanics. It trains you to maintain what trainers refer to as the body’s structural integrity, so that you can stay stable and in control of how you move no matter what storm you find yourself at the center of, be it running and cutting on a field, fighting an opponent in a cage, shoveling snow out of your driveway, or a million other challenges.

Power Development

Of course, with greater rotational movement comes greater power.

Knockout punches and kicks, 90-miles per hour fastballs, and 300-yard drives off the tee all depend on your ability to coil and uncoil your body rapidly and efficiently, and steel mace exercises can simulate the movement mechanics involved in all of the above.

When you’re ready, you can advance your training to include an infinite number of more complex moves that are unique to the mace and really take advantage of its rotational potential, such as the 360, barbarian squat, uppercut, and various other techniques you’ve no doubt seen demonstrated on YouTube (some of which we’ll introduce you to in this article). You’re even welcome to make up your own exercises, as one of the mace’s greatest attributes is its ability to help you express yourself, using it to flow through movements that train your body as well as communicate your passion, not unlike a dance, martial art, or other physical art form.

Fun!

If you’re the kind of person that just can’t get excited about going to the gym and lifting weights from point A to point B, the mace might be the thing that finally motivates you to work out. Wolf says there’s a primal rush you get from lifting the mace overhead that has to be experienced to be understood. Because of its origins as a weapon, it makes you feel like a warrior when you use it. Curling a barbell? Not so much.

“I think part of the appeal is that you can feel the applications the steel mace has immediately,” says Wolf. “Whether or not we feel removed from our history as a tribal people who fought wars, there’s an innate knowledge of how to use tools like the mace that’s still in us. The steel mace can help you tap into that, even if it’s just to get in better shape.”

The Science of Steel Mace

It’s a little ironic that the mace is one of the oldest fitness tools on earth and yet remains among the least studied. Fortunately, that may be changing, as researchers at California State University conducted a trial using Onnit’s steel maces. (Onnit did not suggest or commission the study—the researchers acted entirely on their own.)

“I have a grad student, Christian Ison, who’s a trainer, and he implements the mace in
the training he does with his clients,” says Dr. Eddie Jo, Associate Professor of Exercise Physiology at Cal Poly Pomona, and director of its Human Performance Research Lab. “We were talking about the mace one day and realized there haven’t been any studies done on it, to our knowledge, so why not do one ourselves?”

Jo’s team gathered subjects who had recreational training experience—people who were already performing some kind of resistance training at least three days per week and for at least an hour per session. They had no prior experience using the steel mace. Jo had them work out with Onnit steel maces, following the directions provided in the manuals that were packaged with them.

“We wanted to look at muscle activation patterns during common steel mace exercises,” says Jo. The exercises chosen were the overhead squat, 360, reverse lunge, and lap squat. “We put EMG sensors on the dominant sides of the subjects, and we had them do a set of each of those exercises with the mace head positioned on the dominant side as well as the non-dominant side to see how the dominant side muscles reacted.”

Unsurprisingly, the muscles on the dominant side (for instance, the quads, traps, deltoids, pecs, and triceps during the overhead squat) showed greater activity when the lift was done with the mace head on that side (i.e., pointing to the right on a right-handed person). “But what was interesting,” says Jo, “was when we looked at the oblique and core muscles. The activation of those muscles was greatest when the mace head was held on the opposite side. So if you’re doing the switch squat and the mace head is pointing left, the right obliques will fire harder. It shows that the mace gives you a very unique muscle activation pattern compared to normal barbell exercises, so this could introduce a whole new type of stimulus for your muscles to adapt to.”

Jo adds that being able to work one side of the body and then transition to the other side by simply flipping the orientation of the mace makes the training effect unique as well as convenient. “Your ability to shift core activation is very dynamic and fluid with the mace,” he says. “You can also accomplish more than one type of movement in a single set if you want to, going from a lunge into a lap squat and then an overhead squat, for example.”

More studies need to be done to determine what the long-term benefits of steel mace training can be, but Jo speculates that the mace has great application to sports training. “In life and in sports, when you’re jumping, you’re usually turning also. With the steel mace, you can produce those same multi-planar movements, but with increased resistance. That helps athletes develop power, and should carry over to the playing field—as well as have benefits for general fitness.”

Beyond the physical advantages of steel mace training, Jo noticed some mental ones too, explaining that the subjects said they “loved using the mace,” and that the offset weight helped them to focus on their form more. “They reported feeling sore the next day, too,” says Jo, “saying that they felt they had gotten a good workout.”

What To Look For In A Steel Mace

So you’re ready to buy a steel mace. Congratulations! But before you plunk down your hard-earned funds on another piece of exercise equipment—or try to sand the spikes off a medieval antique—make sure you know what kind of mace is best for you. Consider the following.

The Handle

The bigger your hands, the bigger your mace handle should be. The smallest mace Onnit sells is a seven-pounder, which offers a 30.5-inch long handle. Most women find this model to be appropriate to start. On the other end of the spectrum, our 25-pound mace has a 40.5-inch handle, which is really only for advanced mace wielders.

Remember that steel mace training is humbling. Even a big, strong guy won’t be able to start out with a 25-pound mace for most exercises. And (as most women say) longer isn’t necessarily better. A longer mace is harder to control and puts more stress on your body, so start small.

The Feel

A mace that’s too slick can fly right out of your hands when you get sweaty. Meanwhile, one that’s too tacky can pull the skin off your palms. You want a mace that provides some friction but still allows your hands to glide up and down the handle. Onnit maces feature knurling, like a barbell, and a powder coating for a no-slip grip.

The Weight

Onnit makes maces that weigh 7, 10, 15, 20, and 25 pounds. Most women start with the 7 or 10-pounder, and most men can handle the 10 or 15. For some mace exercises, a lighter weight will serve you better, while other moves can be loaded up more, so you should consider buying two weight increments at once.

Beginner Steel Mace Workout

(See 03:00 in the video.)

The following routine strings together some basic but challenging steel mace moves that will not only give you a feel for mace training but help you start building stability and rotational movement skills right away.

DIRECTIONS

Perform the exercises as a circuit, completing one set for each move in sequence without rest. After the last exercise, rest up to 90 seconds, and repeat the circuit for 3–4 total rounds. Perform 8 reps on each exercise (8 reps per side).

1. Overhead Walk

(See 03:27 in the video.)

Step 1. Hold the mace with an overhand grip, hands about shoulder-width apart. Curl at the elbows and press the mace overhead. Keep your ribs pulled down and your pelvis tucked under so it’s parallel to the floor—don’t allow your back to hyperextend as you reach overhead. Brace your core.

Step 2. Find your balance and begin walking in place, raising one knee at a time up to hip level. The mace will try to pull you toward the side that the weighted end is pointing—don’t let it. If you’re having a hard time controlling the mace, widen your grip a bit. A step on both legs equals one rep; do 8 reps, and then switch the direction the mace is pointing and repeat for another 8 reps.

2. Switch Curl

(See 04:38 in the video.)

Step 1. Hold the mace with one hand close to the mace head and palm facing up. The other should be close to the bottom of the handle with the palm down.

Step 2. Extend the arm that has the palm up so the mace head points down at a 45-degree angle (curl the other arm up and point your elbow out to the side).

Step 3. Now raise the mace head so the mace is level in front of you, and then raise it up to point about 45 degrees (diagonal through your shoulder). Continue raising the steel mace until it points straight up. Now slide the hand on the bottom up the handle to meet the other hand. Your hands will come together for a moment like you’re praying.

Step 4. Slide the hand that was on top down the handle while the one you just moved up grasps the mace head underhand. Go to 45 degrees, level, and then 45 degrees toward the floor again. Continue rotating the mace in this fashion, pausing a moment in each position to make sure you control it. Over time, you can smooth out the motion so you spin the mace more fluidly. Perform 8 reps with the mace head pointing to the right, and then 8 pointing to the left.

3. Split-Stance Counter-Side Row

(See 05:50 in the video.)

Step 1. Hold the mace with hands overhand and shoulder-width apart—one hand should be at the bottom of the handle. Twist your torso so that the mace head points behind you. Stagger your stance so that your front leg is the same side as the direction you’ve turned. Put most of your weight on your front foot. Your back leg should be nearly straight. Drive the ball of your back foot into the floor—the heel can be raised.

Step 2. Row the hand that’s closest to the mace head up. The range of motion will be small, but focus on holding your rotated position.

4. Uppercut

(See 07:07 in the video.)

Step 1. Take a wide grip on the mace so one hand is flush against the mace head. Rotate your body in the direction the mace head points, but keep your hips braced and pointing forward. Keep your elbows locked out.

Step 2. Leading with your elbow, raise the mace up and across your body so it’s angled 45 degrees in front of your chest. Continue raising it until the mace is over your opposite shoulder. Your front arm should look like you’ve just thrown an uppercut punch. Keep the mace close to your body at all times.

5. Cross-Body Lateral Lunge

(See 08:43 in the video.)

Step 1. Grasp the mace with a wide grip and one hand flush against the mace head with your palm facing up. Step laterally with the leg opposite the mace head, bending your knee and lowering into a side lunge as you rotate the mace downward so the head points toward the floor at a 45-degree angle.

Step 2. From there, step back to your starting position while spinning the mace back up to point 45 degrees upward, and then vertical, bringing your hands together in prayer position.

Step 3. Switch your hands, and perform the lunge on the other leg.

Intermediate Steel Mace Workout

(See 10:05 in the video.)

When you’re ready for a greater challenge that incorporates even more multi-planar movement, step up to this intermediate mace routine.

DIRECTIONS
Perform the exercises as a circuit, completing one set for each move in sequence without rest. After the last exercise, rest 45 seconds, and repeat the circuit for 3–5 total rounds. Set a timer and perform each exercise for 30 seconds straight, switching sides at 15 seconds where applicable.

1. Switch Squat

(See 10:27 in the video.)

Step 1. Hold the mace with one hand flush against the mace head and your palm up. Draw your shoulders down and back and tuck your elbows to your sides. Turn your toes out a few degrees.

Step 2. Keeping a long line from your head to your tailbone, squat down until the mace is just above your thighs.

Step 3. As you come back up, slide one hand up the handle and the other down to prayer position, and then continue twirling the mace so the head faces the other direction. Squat again. Inhale as you come up on each rep, and exhale as you squat.

2. Alternating Archer Press

(See 12:22 in the video.)

Step 1. Hold the mace with one hand flush against the mace head and your palm up. Begin with the mace head pointing 45 degrees over one shoulder.

Step 2. Push the mace straight out in the direction the mace head is pointing until your trailing arm is raised to shoulder level and the one nearest the mace head is fully extended, or as close as you can comfortably go. It should look like you’re about to fire an arrow from a bow.

Step 3. Draw the mace back in so it faces upward, make a prayer position, and repeat the archer press on the opposite side.

Rear-Lunge Uppercut

(See 14:43 in the video.)

Step 1. Take a wide grip on the mace so one hand is flush against the mace head. Rotate your body in the direction the mace head points, but keep your hips braced and pointing forward. Keep your elbows locked out.

Step 2. Step back into a lunge with the leg that’s opposite the mace. Lower your body until both knees are bent roughly 90 degrees.

Step 3. Step forward to return to the starting position. As you do so, raise the mace up and across your body so it’s angled 45 degrees in front of your chest. Continue raising it until the mace is over your opposite shoulder. Your front arm should look like you’ve just thrown an uppercut punch. Keep the mace close to your body at all times. Perform reps for 15 seconds, and then switch sides and repeat.

Steel Mace Flow Workout

When you’re comfortable with the steel mace basics, move on to this flow routine, which links familiar steel mace exercises into a fluid circuit.

If you enjoy working with the mace, try experimenting with its cousin, the steel club, starting with our guide to club training.

The post The Steel Mace: Benefits and Uses appeared first on Onnit Academy.

What Is The One-Arm Kettlebell Clean?

The one-arm kettlebell clean delivers many of the same benefits of the Olympic weightlifting clean, but is less technically demanding. It builds full-body explosiveness and power by training simultaneous extension of the hips and knees, which is a movement required in every power sport. As a result, the one-arm kettlebell clean can enhance vertical jumping ability and general speed.

Because you work one side at a time, the one-arm kettlebell clean trains you to resist rotation at the torso, which makes it an excellent core strength exercise. As with all kettlebell movements, it will build grip strength as well.

The one-arm clean can serve as a transition point after you’ve mastered a simpler move like the kettlebell swing and deadlift and before you take on advanced lifts such as the kettlebell rotational clean and kettlebell rotational clean to bent press. The one-arm clean will teach you to take a kettlebell from the floor to the rack position (shoulder level) safely, setting you up for a variety of press, squat, and swing techniques.

How To Do The One-Arm Kettlebell Clean

(See 01:10 in the video above.)

Step 1: Place a kettlebell on the floor in front of you. Stand with your feet straight and set between hip and shoulder-width apart. Now actively screw them into the floor so you feel your hips and glutes fire up—imagine twisting up turf beneath your feet, or using them to spread a bunched-up carpet apart. Your feet shouldn’t move but your lower body should become tense. Bend your hips back and bend your knees a bit to reach the kettlebell. You want a stance that’s somewhere between a high hip hinge and a vertical squat. Aim for an athletic position—”The kind you’d take if you were about to tackle someone in football,” says Shane Heins, Onnit’s Director of Fitness Education. Draw your shoulder blades back together and down—think: “proud chest.”

If the kettlebell is still too low to reach, you can elevate it on a box or a bench.

Step 2. Pull your elbow back as if performing a row, drawing the kettlebell back toward your hip. At the same time, extend your hips and knees to generate momentum and stand up tall. Allow your wrist to rotate as you row the bell. Pat it with the other hand to help you wrap the kettlebell around your wrist. To finish the clean, drive your elbow forward and punch through so your forearm is vertical.

Step 3: Make sure your wrist is straight and aligned with your forearm.

Don’t dismiss the wrap. It may seem like a crutch that only beginners use, but it’s a great way to reinforce the mechanics you need to clean correctly WITHOUT banging the weight against your wrist. Heins says he still uses the wrap technique often in his own training, even though he’s capable of cleaning heavy kettlebells without it.

Step 4:  Reverse the motion by unraveling the kettlebell around the forearm, lowering your elbow to straighten your arm, and hiking the bell between your legs quickly to begin the next rep. Complete all your reps on one side and then repeat on the other.

If you have trouble performing the clean smoothly, simply break it down into its component parts and do them one at a time (see 6:04 in the video). Start in a high hinge (bend your hips back and keep your knees closer to straight), row the bell and cup it with your free hand, and extend your hips to stand up tall. With the bottom of the bell facing forward at your side, it may look like you’re holding a toy rifle of some kind (Heins jokes that it’s the “Master Blaster 3000”). From there, use your hand to wrap the bell and punch your arm through so it’s vertical. When you’ve got that movement down, doing it fluidly to perform a real clean will feel more natural.

Muscles Worked in the One-Arm Kettlebell Clean

– Quads

– Hamstrings

– Glutes

– Calves

– Shoulders

– Upper back

– Forearms

– Core

One-Arm Kettlebell Clean Benefits

– Improved total-body power

– Increased explosiveness

– Grip strength

– Enhanced vertical jump

– Core, shoulder, and posterior chain strength

How to Use the One-Arm Kettlebell Clean

Due to the total-body nature of the one-arm kettlebell clean, it can suffice as a workout by itself. Go heavy for strength (say, five sets of five reps on each side), or test your conditioning by setting a timer for a few minutes and seeing how many reps you can do in that time.

You can also use it to key up your central nervous system before a heavy workout. Two or three sets of 3–5 reps can help you better recruit musculature for a strength and power workout. Of course, the clean works as a jumping-off point for dozens of other kettlebell exercises. Bringing the weight from the floor to the rack position sets you up for overhead presses, squats, lunges, and so on. You may use the clean to begin a kettlebell flow, or as part of a total-body circuit.

One-Arm Kettlebell Clean Regression

If you have difficulty completing the clean without hurting your forearm, practice the half-kneeling, one-arm clean. The mechanics are the same; you just start in a half-kneeling position on the floor. Once you’re comfortable with that, you can progress to the half-kneeling dead start, and then move on to the standing dead start, followed by the assisted clean, and finally the full one-arm kettlebell clean. You can find this entire sequence HERE.

One-Arm Kettlebell Clean Progression

When you’ve got the one-arm kettlebell clean down, try advancing to a one-arm kettlebell clean with rotation. This will prepare you to perform the more twisty and multi-planar movements that the clean is intended to set you up for. (See 09:05 in the video.)

Step 1. Reach down to grasp the kettlebell and reach your free arm behind you. Twist your wrist so that the palm of the working hand is facing away from your body.

Step 2. Clean the bell, rotating your wrist and and rotating your torso backward to the same side you’ve cleaned to, but keep that hip braced straight and facing forward (don’t let it twist back when your torso does).

Step 3. Rotate in the opposite direction, twisting your torso 45 degrees to face the other hip (while keeping that hip braced and forward).

Step 4. From there, rotate back in the direction of the working side—the first rotation you performed—and then unravel your wrist and let the kettlebell down.

If you need a refresher course on kettlebell basics, see our Full-Body Kettlebell Workout for Beginners article.

The post The Expert Guide To The One-Arm Kettlebell Clean Exercise appeared first on Onnit Academy.

Here’s a complete guide to the kettlebell around the world, from how to master to the movement to the whole world of movement it can unlock for you.

What Is The Kettlebell Around The World?

The kettlebell around the world, also called a hip halo by some coaches, has you moving a kettlebell around your body in a circular pattern, switching from one hand to the next. You’re allowed to use momentum so that the kettlebell flows smoothly through the transitions, but you have to control it—the weight can’t touch any part of your body (aside from your hands).

Here’s how to do it.

(See 01:02 in the video.)

Step 1. Stand very tall holding a light kettlebell (about 4–7 kilos/8–16 pounds) in one hand. Hold the bell at the far edge of the handle so you leave space for the other hand to grasp it easily. Retract your neck and tuck your chin, draw your shoulders back so your chest is proud, and tuck your tailbone under slightly so that your pelvis is level with the floor. You should feel like your posture is perfect. Now brace your core and hold this position throughout the exercise.

Step 2. Set the kettlebell in motion around your body (either direction, clockwise or counter-clockwise, is fine). When the kettlebell is directly in front of your body, switch it over to the other hand, and when it comes around directly behind your body, switch back. Move fast enough that you get some momentum going, but don’t try to rush it—set a steady rhythm.

Keep your arms straight the whole time. “Allowing bend in the elbows will cause your arms to get tired,” says Shane Heins, Onnit’s Director of Fitness Education.

It’s important to maintain your posture and balance throughout the movement. As you get more experienced and graduate to bigger kettlebells, this will become more challenging, so focus on staying tall and braced from the very beginning. Heins suggests placing a small box or other object between your feet and squeezing it in order to train you to keep your thighs tense—this will help you maintain stability.

You can perform the around the world for reps or time (for example, 30 seconds straight), but make sure you work it in both directions. So if you do 5 reps clockwise, immediately follow up with 5 reps counter-clockwise, so you build balanced strength.

Around The World Kettlebell Benefits

That circular motion accomplishes much more than meets the eye, and you’ll feel it all as soon as you start doing the movement (correctly, that is). Controlling the kettlebell’s path and momentum while keeping good posture trains the core and a bunch of other stabilizer muscles hard. (What else is going to keep you from bending or twisting as the weight travels away from your center of gravity?) Your wrist and forearm muscles have to clench the handle to prevent the weight from slipping away, so the around the world works your grip strength too.

On top of that, the centrifugal force you generate with the around the world creates a pulling effect that tractions out the shoulders, elbows and wrists. This really feels great, especially if you have years of heavy, joint-compressive lifting under your belt, and can arguably help to prevent injury and speed recovery from other strength-training workouts. Decompressive weight training, Heins says, is often overlooked and very valuable: controlling a weight as it pulls on your joints strengthens them, just as lifting a weight that compresses your joints does.

If you have athletic ambitions, or just want to get good at more advanced kettlebell training, the around the world should be a staple in your programs, as it works eye-hand coordination and balance. Over time, you’ll develop a better sense of where the kettlebell is in space around you, and you’ll be able to make the hand offs quicker and more smoothly.

Sophisticated kettlebell routines require you to change direction quickly and express strength in all the different planes of motion. Kettlebell flows, where you transition from one exercise to another, such as a clean to a squat and then rotational press, are an example of this. The kettlebell around the world lays the groundwork for this level of skill, helping you get comfortable with moving a weight 360 degrees around your body. You’ll have a hard time getting the hang of cleans, snatches, and twisting motions without mastering the around the world as a pre-req.

What Muscles Do Kettlebell Around The Worlds Use?

To list them all would take more words than we have the patience to write (and, presumably, more than you’d have the patience to read), but take our word that the deltoids, core (rectus abdominis, olbiques, transversus abdominis), wrist flexors and extensors, spinal erectors, quads, glutes, and various muscles in the hips on down will be engaged in every revolution of the around the world.

What Weight Kettlebell Should I Use?

When you’re starting out with the around the world, go light to get the form down. A 3–7 kilogram bell (8–16 pounds) is perfect. Once you’ve mastered the technique, you can still get a lot out of light weight, but you’re also welcome to increase the load if you want to make the exercise more of a core and grip workout. A 24–28 kilo bell (53–62 pounds) will be very challenging.

The around the world can serve many different functions and fit into your workouts in several ways. You can use a light bell in your warmup to jumpstart your core and hips, activating those muscles for better firing during the heavier or more explosive training to come. You can also add the around the world to a mix of other exercises for a battery that zeroes in on the core—do this at the end of a session for some extra work, or on an “off” day. The around the world can also be done between sets of kettlebell or conventional strength exercises for some active recovery. Think: you’re giving your muscles and nervous system a rest, but you’re still doing a little work to burn more calories, keep your heart rate up and build some conditioning, and stay warm. Heins particularly likes the around the world between sets of overhead pressing, as it will decompress your shoulders and elbows, and single-leg work.

Light around the worlds should be done for 3 sets of 20 reps, or 30 seconds in each direction, while a heavier bell can be used for 5 sets of 4–6 reps each direction.

How To Stretch Before Exercising?

Use the following mobility sequence from Heins (demonstrated in the video below) to prepare your hips for the around the world, or any other lower-body focused workout you have planned. Perform the movements as a circuit, completing one set for each in sequence and then repeating for 2–3 total rounds.

1. Kneeling Hip Flexor Stretch, 12 reps per side

2. Standing Knee Circle, 5 reps each direction, each leg

3. Spit-Stance Hip Coil (no weight), 12 reps each side

4. Ankle Spring Primer, 5 reps each side

BONUS: Thai Chi Knee Twist, 60 seconds each direction

Kettlebell Exercise Alternatives

You’ll be able to better see how the around the world translates to fancier kettlebell movements and sports when you move on to its progressions. As soon as you have the basic around the world down, try one of these variants.

Around The World With Hand Catch

(See 01:56 in the Kettlebell Around the World video)

This move takes the rotation from your hips up to your shoulders, making it a great exercise for full-body power. It mimics the mechanics of throwing a punch or a shotput, training you to coil through your core and stabilize your body with your hips.

Step 1. Perform the around the world as normal to get some momentum. Then, when you’re ready, bend your working arm to lift the kettlebell up to your opposite shoulder.

Step 2. Catch the bell with your free hand, bracing your core so you absorb the force. If you’re using a bigger kettlebell, you may have to allow your torso to rotate a bit in order to slow the kettlebell down on the catch—that’s OK, as this is how you move in real life. Now redirect the force by gently pushing the kettlebell back down and circling your body in the opposite direction.

Once you’ve got the hang of that, you can alternate catches on each rep. That is, circle your body clockwise and catch with the right hand, and then immediately circle counter-clockwise and catch with the left.

Step-Back Hip Coil

(See 03:38 in the video)

If you watched the video on how to warm up above, you recognize this exercise already. Here, it’s done with the kettlebell for strength and power (where as, done unloaded, it’s just a really great mobility drill). The step-back hip coil progression keeps the movement of the around the world at your hips but really allows you to practice transferring power between legs. It looks like a speed skater pushing off from one leg on the ice, loading up for a puck pass in hockey, or any number of other movements that require lower-body power.

Step 1. Perform the around the world as normal. Let’s say you’re moving counter-clockwise with the kettlebell in your right hand. As you transition the bell to your left hand, step back with your right leg and create a long line from your leg through your spine to the top of your head as you bend slightly at the hips (you can keep your heel elevated and only touch down with the ball of your foot). This will help you decelerate the kettlebell. Make sure your lower back stays neutral and does not round forward as you bend at the hips.

Step 2. Step forward again as you reverse the direction of the kettlebell and repeat on the other side. As with the around the world with hand catch, you can take your time doing a few revolutions with the bell before you coil on the other side.

Heins notes that the step-back hip coil works your hip in internal rotation, which is an oft-neglected movement pattern and very important for overall hip and lower-back health. An inability to move your hip well internally can cause the lower back to take over some movements, and that can lead to pain, so the step-back hip coil doubles as a prehab exercise.

See the kettlebell around the world in action in our Full-Body Kettlebell Workout for Beginners.

The post The Kettlebell Around The World Exercise Explained appeared first on Onnit Academy.

What Is A Box Jump?

While the exercise does clearly involve jumping from the floor onto a box, it’s not quite as simple as it seems. Not any box will do, and the object isn’t just to get up on top of the surface by any means necessary.

The box jump is a low-level plyometric exercise. That is, it trains the muscles’ stretch reflex to develop explosive power. You quickly lower your body into a half-squat to stretch the glutes and hamstrings, and then use the resulting release of elastic energy to help power you up in the air. So as not to come down too hard, the box is there to break your fall, but it also teaches you to land like a cat—decelerating your body mass and absorbing the force of your jump. These skills are highly valuable to athletes who jump and sprint, so the box jump is a staple in many sports training programs.

At the same time, because it’s not particularly complex or dangerous to perform (if done as intended), the box jump can be done by recreational gym rats who want to add a bit of power training to their routines.

The boxes used can vary in height from a few inches to a few feet, and can be constructed of hard wood, rubber, firm padding, and even steel. Whichever kind you have access to, make sure you start with one that’s not too high (more about this below) and offers a stable surface for your feet to land on—and an even base that doesn’t wobble. Some boxes have fairly small foot surfaces, so, in general, the wider or larger the platform you have to jump on to, the better. (You’ll have less chance of missing it!)

How To Do The Box Jump

Before we get into how to execute the jump correctly, let’s go over a few ground rules for safe box jumping. You’ll also want to check out the five progressions for building up to a box jump from Onnit Director of Fitness Education Shane Heins, beginning at 1:03 in the video above.

Use A Moderate-Sized Box

First of all, be conservative with the height you choose. You should warm up on boxes that are very low to the ground—just a few inches to a foot or so high—and do your work sets with a box that’s only around knee height. Twenty-four to 30 inches high is plenty for all but the most experienced jumpers. Yes, we know you see people jumping onto 50-inch boxes and higher on YouTube and Instagram, but believe it or not, most of them are just trying to impress you, and they aren’t using good form.

The depth you squat to in your takeoff and your landing should be almost the same. That is, you should be landing in approximately a half-squat position, or where your knees are bent about 45 degrees. If you land so deep that your knees are practically to your chest and your lower back is rounded, the box is much too high!

Think about it like this: the point is to build athletic power. If you’re a football player exploding off the line of scrimmage, would you start in the bottom of a squat? Do you bend your knees 90 degrees to take a jump shot in basketball? Do sprinters curl up into a ball before they take off down the track at the sound of a starter’s pistol? Of course not. The goal of a box jump isn’t to leap as high as possible—it’s to train the mechanics that let you develop power when it counts.

Stand Far Enough Back

It matters how far away from the box you set up. Stand back a few feet and extend your arms so that your fingertips touch the box when you reach forward with both hands. That represents the distance that should exist between you and the box when you’re about to perform your first rep, so make a note of it and stand in that spot when you begin your set. Respecting this space ensures you won’t catch your fingers on the box during your upswing when you propel yourself upward into the air. It’s also a good distance to prevent you from overjumping your target and tipping the box forward when you land.

Swing Your Arms Up

Speaking of upswing, understand how much your arms contribute to your jumping momentum. Your arms should swing down by your sides as you descend into the half-squat—the mechanics are somewhat like compressing a spring—and then swing upward with force as you jump. Many people do the opposite, driving their arms down toward the floor as they extend their hips and legs. While this may make you look like a human rocket ship, it’s utterly pointless in jump training, as it does not transfer forces from the floor and through your body to facilitate height.

Land With Control

You know the old saying, “What goes up must come down,” so we have to talk about how to land. Your landing should be quiet and soft. Coming down like a ton of bricks puts a lot of stress on the joints of the lower body and can cause injury. Also, as mentioned above, one of the benefits of a good box jump is learning to slow the force of your movement down, so try to stick your landings like a gymnast. If you find that you’re landing hard and loudly, guess what? The box is probably too high.

Step Down From The Box

Lastly, don’t jump off the box to return to the floor between reps. STEP down off it. Jumping down is the most common box jump technique mistake, and it’s a dangerous one. There’s no benefit to jumping backward off a box, and even at fairly low heights, it can injure your Achilles tendons. (Yes, advanced athletes sometimes jump backward to dismount the box, but we don’t recommend it for folks reading this article.) Set a smaller box, bench, or step next to the box you’re jumping onto and use it as a staircase to get down (if the box you’re jumping on is too high to comfortably step down from directly).

With all these caveats and details out of the way, here’s a step-by-step guide to performing the box jump movement.

Step 1. Set a box on the floor that’s roughly knee height. It should be high enough to provide some challenge but not so high that you can’t land safely. Twenty-four to 30 inches should do it. Extend your arms straight in front of you and stand at a distance that allows your fingertips to touch the edge of the box.

Step 2. Stand with your feet about hip-width apart. (If you deadlift, your deadlifting stance should be about right.) Quickly dip your hips, bend your knees, and swing your arms back to gather power.

Step 3. As soon as you feel your body drop into a half-squat position, explode upward, extending your hips and knees and throwing your arms up and forward to jump off the floor.

Step 4. Land softly in the middle of the box with both feet at the same time. Step down from the box carefully and take a moment to set up for the next jump.

What Muscles Are Used In A Box Jump?

The box jump is a major compound movement that requires a transfer of energy through the entire body, so you can pretty much point to an anatomy chart at random and land on a muscle that’s involved in the exercise in some way. Of course, the quads, hamstrings, and glutes are the prime movers, creating the hip and knee extension that lifts you off the floor, and your shoulders work to drive the upswing of your arms, which helps to propel you upward.

However, because you don’t load the body like you do in a squat, deadlift, or other resistance exercise, you probably won’t feel sore in these muscles the next day, and you won’t see size gains in them from jumping alone. The box jump doesn’t create a great deal of muscular tension, or maintain that tension for a length of time, so it’s not going to build bigger muscles. Using it in place of a leg exercise for muscle mass is not a good idea.

You may be surprised, however, to find that your deep abdominal and oblique muscles are in fact sore a day or so later. That’s indicative of how involved your core is in transmitting forces to your arms for the takeoff. Remember that the goal of box jumping is power, and the result is a highly trained chain of faster, more explosive muscles that work together as a unit.

Best Box Jumping Exercises

Most of the time, you should practice box jumps with a 24–30-inch high box, using the technique described above. Three to five sets of three to five reps is a good general prescription for power gains, but end each set the moment you feel yourself slowing down or losing control of your landing.

Occasionally, to test yourself, you can use a higher box and attempt bigger jumps that might cause you to land deeper than a half-squat. In this case, you can work up to sets of three, two, or just one all-out jump. But for safety’s sake, do this sparingly, and have a spotter handy in case you stumble on the box. One to three times a week is enough frequency for box jumps.

Please be cautious. Unlike with strength training, where you need to add weight or reps on a semi-regular basis to keep making gains, progressing jump training isn’t so linear. Most athletes don’t need more than a moderate-height box, so don’t think that because you leapt up onto a 24-inch box last week, you need to use a 25-inch one this week. If you get to the point where box jumps feel easy at a certain height, work on jumping higher and landing on the same-size box before you bother to increase the elevation. Then, as explained, you can sporadically test your training by attempting higher boxes.

If you’ve done CrossFit WODs or attended a HIIT (high-intensity interval training) exercise class, you might have been instructed to do box jumps as part of a circuit or conditioning drill, using high reps and short rest periods. We suggest that you don’t train like this with box jumps. Explosive exercises and high repetitions don’t mix. That is, power movements like the box jump must be done for lower reps to prevent your form from breaking down due to fatigue. And you simply can’t generate the same explosiveness on a 10th jump as you can on the first three of a set, so high reps don’t suit the goal. Box jumps should also be done with longer rest periods for this same reason—two minutes or more between sets.

If you want to get an endurance boost from your training, you can get it with any number of other, safer exercises. That said, if you’re determined to mix power and conditioning in the same session, we have a safe plan to do so below under HIIT Box Jump Workout.

The earlier in your workout that you do box jumps, the more power and height you’ll be capable of getting. But realize that the box jump does cause some impact on your joints. You also shouldn’t do any kind of fast movement without thoroughly warming up your muscles first, and even a great mobility routine done at the start of your workout may not be enough. Therefore, we suggest placing box jumps toward the beginning of your session, so you’re fairly fresh when you do them, but not cold. For instance, you might do them as your second or third exercise, after a few sets of hamstring and glute work. Leg curls, hip thrusts, or glute-ham raises will pump blood into the posterior chain (the muscles on the back side of the body) and lubricate the hips and knees.

There are other exercises you can do to that sometimes don’t require a box, or even a jump, but will support your box jump training and improve your overall jumping ability. By choosing movements that train the upper body to generate upward force, or that strengthen the posterior chain, you can tighten up the component mechanics that make for gravity-defying leaps.

Weighted Jump With Kettlebell

See the video above at 0:25

Step 1. Place a kettlebell on the floor and stand with feet hip-width apart. Get into a half-squat, as if you were winding up for the box jump—you should be able to reach the kettlebell handle from that position. If the weight is too low, elevate it by resting it on a weight plate or mat. Now deadlift the kettlebell so you’re standing tall.

Step 2. Quickly dip your hips and knees as if jumping, lowering the kettlebell to just above the floor (don’t let it smack into the platform you created), and then explode up. Don’t worry about jumping high, just focus on the power of your explosion. Your feet may rise off the floor, but it’s OK if they don’t. Land softly, reset, and repeat. Do 3 sets of 3–6 reps.

Weighted Stepup

See the video at 1:22

The stepup can help familiarize you with the use of a box while building the glutes, hams, and quads. You can do it with dumbbells, kettlebells, a barbell across the back of the shoulders, or a weighted vest.

Step 1. Hold onto your weight and place your foot on a box or bench. It should be high enough so that your thigh is about parallel to the floor when the foot is resting on it.

Step 2. Drive through your heel to step up onto the bench without letting your rear leg rest on it—let it dangle behind you. Step back down, starting with the trailing leg. Do 3 sets of 8–12 reps.

Push Press

See the video at 1:45

Doable with a barbell, kettlebells, or dumbbells, a push press is just an overhead press that uses the legs for assistance. By dipping the knees, similar to how you move in a jump, and then driving up explosively, you can press more weight overhead, which makes the exercise effective for upper-body strength as well as generating power from the ground up. Push pressing is also a great way to learn to keep your body tight and braced. If any muscles are relaxed, you won’t be able to move the weight effectively.

Step 1. Hold the weight at shoulder level and stand with feet about hip width. Brace your core.

Step 2. Drop into a quarter-squat, initiating the descent by bending your knees. Keep your head, spine, and pelvis in line so your back is flat and your eyes and head are forward. You don’t want to turn this leg drive portion of the lift into a squat, so only bend your knees enough to get some momentum, and don’t hinge your hips too much. Imagine yourself doing the move against a wall and sliding your torso up and down it—you should be that upright.

Step 3. As soon as you’ve dipped, extend your hips and knees explosively to stand up straight, driving through your heels, and simultaneously press the weight straight overhead. You’ll need to push from your shoulders and triceps, but with a strong and quick leg drive, most of the power for the press should be provided by your lower body. Keep your core tight throughout the move so your spine is stable and safe. Lower the weight back to your shoulders, take a moment to reset, and then begin the next rep. Do 3 sets of 5–10 reps.

HIIT Box Jump Workout

We’ve established that box jumps should be used conservatively and for athletic performance, but we can’t deny that they spike the heart rate and involve almost every muscle in the body, so we understand if you’re tempted to use them in a conditioning workout that burns calories and boosts endurance.

A way to do this safely is to perform a low-rep EMOM, meaning that you set a timer and perform a set of jumps every minute on the minute. Find a fairly low box—low enough that you know you won’t have trouble landing on it even if you’re tired—and start the clock. Do three jumps, and then rest for the remainder of that minute. When the timer reaches 1:00, do another set. So let’s say the three jumps takes you 15 seconds to do; you’ll get 45 seconds to recover.

Continue this for 20 minutes. It may seem easy for the first five minutes or so, but those short rest periods will catch up with you. This kind of workout probably won’t do much for speed and power, but it can serve as cardio.

If you’re a recreational gym-goer who mainly trains for a better physique and functional strength, but you’d like to add another athletic component to your workouts, incorporating box jumps before your biggest lift of the day can help to prime your nervous system. This can improve your performance on lower-body compound exercises like the squat and deadlift by supporting the recruitment of your fast-twitch muscle fibers. A few sets of box jumps done prior to a big barbell lift won’t fatigue you for the heavy training, but it may allow you to lift heavier and with better form.

Another option is to combine box jumps with a barbell movement, doing the two back to back. This is called contrast training, and it’s a method research has shown can maximize power development in athletes.

In a contrast set, you might do deadlifts with 80% of your max for a set of five (you should have at least a rep or two left in you; don’t go to failure), and then take about 30 seconds rest—during which you can walk over to the box. Now do a set of three jumps at a challenging height. Rest three to five minutes, and repeat for three to four total sets. This is stressful training, so it should be your only exercise for the session, and you should only do contrast training for three weeks at a time.

The post The Pro’s Guide to Box Jump Exercises and Workouts appeared first on Onnit Academy.

But if you think your standard gym rat training sessions are going to lift you to new heights, you’re mistaken. To jump like an elite athlete, you need to train like one, starting with the five exercises we’ll outline here.

How To Jump Higher: 5 Exercises To Improve Your Vertical

This list of movements was compiled by a pair of trainers who know a thing or two about making athletes more explosive: Jason Benguche, former assistant strength and conditioning coach for the Carolina Panthers and Director of Performance for Jet Movement Labs (@movement_mogul on Instagram), has worked one-on-one with NFL quarterback Cam Newton. And Firdose Khan (@dose_9), head trainer at Nine Innovations athlete training facility in Houston, has worked with such athletes as former NBA MVP Derrick Rose and NFLers Arian Foster, Braxton Miller, and Brian Cushing.

Follow their advice, as demonstrated in the video above by the talented Hannah Eden (@hannaheden_fitness), a distinguished coach in her own right, and you’ll be jumping out of the gym in no time.

Muscles Used for Jumping

A jump is the result of triple extension: the simultaneous and explosive extension of the hips, knees, and ankles. Whether you’re watching an Olympic weightlifter perform a clean, a sprinter take off down the track, or a basketball player go up for a dunk, triple extension is the driver. Below are the muscles that make it possible.

–Glutes (gluteus maximus, gluteus medius), for hip extension

–Quadriceps (vastus lateralis, intermedius, and medialis; rectus femoris), for knee extension

–Hamstrings (biceps femoris, semimembranosis, semitendonosis), for hip extension, knee flexion, and absorbing landings

–Calves (gastrocnemius, soleus), for ankle extension (plantarflexion)

–Abdominals and core (transverse abdominis, rectus abdominis, internal and external obliques, multifidi, erector spinae), for trunk stability

How To Test Your Vertical

Before we explain how to build your jump, let’s make sure you know how to jump properly in the first place and can get a baseline measurement for it. See 00:25 in the video above for Eden’s demonstration and a walk-through of all the steps.

How To Jump

Step 1. Stand with your feet directly under your hips. If they’re wider than that, you won’t be able to translate as much power from your legs directly into the ground. Drive your knees outward without moving your feet, so you feel tension in your hips. This will turn the hips on for better jumping power.

Step 2. Quickly dip your hips and knees, throwing your arms behind you to gather momentum. Picture a half-squat position or slightly shallower—your hips must be behind your knees. The hip action in a jump is the same as the hinge pattern you perform with your hips during a deadlift or clean—bend them back while keeping a long spine.

Step 3. Jump as high as you can while flinging your arms forward and overhead. When you leave your feet, only reach up with one arm; you’ll be able to reach a higher point this way versus reaching with both arms. Land softly with a slight knee bend, being careful not to let your knees cave inward. Drive them outward as you did when preparing to jump in the first place.

How To Measure Your Jump

At the competitive level (i.e., the NFL and NBA combines), vertical leap is measured using a “jump tester”—a tripod with a series of thin plastic sticks one inch apart. If you have access to this equipment, it’s your best bet for getting an accurate measurement. A cheaper, more feasible option is to do your jump next to a wall and mark the highest point you touch with a piece of chalk.

Whichever equipment you use, the first thing you’ll need to do is measure your reach standing flat-footed on the floor with one arm fully extended straight overhead. (You can measure your reach up against a wall for the chalk option.) Then, when you mark the highest point you touched, you’ll subtract your reach from that number. For example, if your reach is 90 inches and you touched 115 inches up on the wall with your chalk, your vertical leap is 25 inches.

After warming up, make anywhere from 3 to 5 jump attempts.

Most official vertical jump tests do NOT permit any steps to be taken leading into the jump. No running start or even a power step allowed. Stand on both feet in one spot and jump from that spot.

How To Stretch Before A Jump Workout

Before we get into the exercises that will build your jump height, warm up with these moves from Onnit’s Director of Fitness Education, Shane Heins (@shaneheins). They will help to improve mobility in your hips as well as durability in your knees and ankles, improving performance and reducing the risk of injury.

Jump Higher with These 5 Exercises

1) Depth Jump

(See 01:26 in the 5 Exercises To Improve Your Vertical video)

The defining characteristic of the depth jump is that the jump is preceded with the strong eccentric (negative) muscle action caused by dropping down from a raised surface, as opposed to a standard box jump where you start on the floor. This makes the depth jump a true plyometric movement, where the muscles are stretched suddenly (by the impact of the landing), producing a powerful shortening of the muscle fibers.

“The depth jump utilizes the stretch-shortening cycle to improve CNS activation and rate of firing,” says Benguche. “The shock of rapidly absorbing, and then producing, force trains the body to respond with greater levels of reactive force to improve the elastic components of the lower body.”

Step 1. Stand on a plyo box that is 10–30 inches high (start with a lower one if you’re brand new to depth jumps). Your body should be fully upright and your feet hip-width apart, hands at your sides.

Step 2. Step off the box, leading with one foot and then following with the other, to drop yourself down to the floor. You’re not hopping or jumping off the box; your body should simply fall to the floor.

Step 3. Land squarely on the floor on both feet (again, around hip-width apart) and immediately jump as high as you can, straight up in the air. It’s important that you spend as little time as possible with your feet on the floor before the jump—it should be a split-second reaction. Don’t lower down into a squat before leaving your feet. Just let your hips and knees dip naturally, then extend them explosively to launch upward. Drive your arms straight up as you do so.

Step 4. Land back down on the floor with soft knees, settle yourself, then step back onto the box and repeat the sequence for reps. Don’t be in a rush between reps; the objective of this exercise is explosive power, not conditioning.

Technique Tip: Be mindful of your body position as you land on the floor and go into the explosive jump. Your hips should be over your heels, and your weight over the center of your feet. You want to jump straight up (vertical), not out in front of you.

How to Use the Depth Jump

Timing: Do depth jumps early in your workout, after you’ve warmed up thoroughly and before lower-body strength exercises like squats.

Sets/Reps: Benguche recommends keeping the total volume of reps very low on depth jumps: 2–4 sets of 2–5 reps.

“No additional load is necessary,” he says. “However, the height of the box for the depth jump can be progressed over time to increase the challenge and stimulus.”

Regression

In the absence of a plyo box, depth jumps can be performed using a standard weight bench. Since benches are lower to the ground than many boxes, they’re a good option for those new to the exercise.

Progression

Athletes often do depth jumps with two plyo boxes: one to step off of and another to jump onto. Essentially, it’s a depth jump into a box jump. When doing this variation, make sure to leave enough room between the boxes to allow you to land and jump safely (3–5 feet between boxes should work). To advance within this progression, increase the height of the second box gradually as you develop more strength and power.

2) Medicine-Ball Broad Jump

(See 02:31 in the video.)

Adding resistance to jumping exercises (versus using bodyweight only) can help increase strength and power. And it doesn’t take much weight to get the job done—a 10-pound med ball will suffice.

With this exercise, you’re going for maximum distance instead of height, but the benefits will carry over to your ability to jump vertically. “The med-ball broad jump is great for developing hip explosion, due to the power aspect that comes from loading the hips with the hinge-type motion,” says Khan.

Step 1. Stand a few feet back from a wall holding a medicine ball (about 10 pounds) in both hands. You should have plenty of floor space in front of you to jump. Start with the ball overhead, arms extended, and your feet hip-to-shoulder-width apart.

Step 2. Lower your arms toward the floor and bend at the hips and knees to create elastic energy for the jump. (This is technically the eccentric, or negative, phase of the exercise.)

Step 3. Without hesitating, explode out of the “hole,” pressing through the balls of your feet and throwing your arms out ahead of you. Toss the ball into the wall and jump as far out in front of you as possible.

Step 4. Land with bent knees, through your heels, and absorb the eccentric force by going into a squat if necessary. (This finishing squat is not a crucial part of the exercise—just a safe way to land.) Catch the ball as it rebounds if you can, or, if the wall is further away, let the ball fall. Then pick it up and repeat for reps.

Technique Tip: When doing a broad (long) jump for maximum distance, you want to get some height, but not too much. Aim for your trajectory to be under 45 degrees.

How to Use the Medicine-Ball Broad Jump

Timing: Do medicine-ball broad jumps early in your workout, before heavy lower-body strength movements. Khan prescribes glute activation work with his athletes before jumping exercises, such as hip bridges or lateral band walks, to help the glutes “wake up” and fire harder.

Sets/Reps: Khan recommends 3 sets of 5 reps, using a 10-pound medicine ball.

Regression

Those new to explosive jump training should start with no added resistance. In this case, simply do the standing broad jump without the med ball.

Progression

Khan often adds an extra layer of resistance to the med-ball broad jump with his athletes: a heavy-duty elastic band attached to the back of the waist with a belt and anchored to a solid structure behind the athlete at floor level. As the athlete jumps and travels through the air, the resistance from the band increases as it stretches.

3) Back Squat

(See 03:29 in the video.)

Strength begets power, which leads to a better vertical, and there’s no better exercise for increasing lower-body strength than the classic barbell back squat. 

“The squatting pattern is one of the best ways to train the body for improved strength and power,” says Benguche. “Quads, hamstrings, and glutes will be the primary drivers of the squat, and all have high importance for helping improve the vertical jump.”

Step 1. Set up in a squat rack and grasp the bar with your hands as far apart as is comfortable. Step under the rack and squeeze your shoulder blades together and down, wedging yourself under the bar so that it rests on your traps or the back of your shoulders.

Step 2. Nudge the bar out of the rack and step back, setting your feet at shoulder width, with your toes turned slightly outward. Without letting your feet actually move, try to screw both legs into the floor, as if you were standing on grass and wanted to twist it up—you’ll feel your glutes tighten and the arches in your feet rise. Take a deep breath into your belly and brace your core, pulling your ribs down so your torso forms a solid column.

Step 3. Keep your weight over your mid foot and your eyes facing forward. Bend your hips back and spread your knees apart as you lower your body down. Go as low as you can, while keeping your head, spine, and pelvis aligned.

Step 4: Push through your feet to come back up, extending your hips and knees.

Technique Tip: Keep your heels on the floor while squatting. The bar should remain over your mid foot (not the balls of your feet) throughout both the positive and negative portions of the lift. If your heels come off the floor, it means the weight has shifted too far forward.

How to Use the Back Squat

Timing: For maximum strength gains, do back squats as either the first or second strength exercise in your workout.

Sets/Reps: For general strength and lower-body development, Benguche recommends 3–6 sets of 3–8 reps with moderate loading—70%–85% of your one-rep max (1RM). For developing more speed and power, he recommends lighter loads (55%–70% of 1RM) for 3–6 sets of 2–5 reps. Squats performed with light weights but done so explosively that your feet leave the floor when you come up are called jump squats (see “Progressions” below).

Regression

Scaling the back squat for beginner-level athletes generally entails sticking to lighter loads (even bodyweight only to start) while learning proper technique. Goblet squats with a kettlebell or dumbbell can be used to practice form, but keep in mind that goblets are an anterior (front-loaded) variation and won’t directly mimic the mechanics of the back squat.

Progression

As you gain experience, multiple barbell squat variations should be rotated into your program. Jump squats in particular will help you develop more explosive strength that translates directly to a vertical jump.

In the jump squat, you lower your body only until your thighs are parallel to the floor (you don’t go for maximum depth, as in the conventional back squat). As you come back up, do so explosively so that your feet leave the floor at the top—three to six inches is high enough. Land softly with a slight knee bend, reset, and repeat for reps.

4) Rear-Foot Elevated Split Squat (Bulgarian Split Squat)

(See 04:48 in the video.)

This isn’t just some light-duty assistance exercise. The rear-foot elevated split squat (aka, Bulgarian split squat) is a legitimate movement for increasing pure glute and quad strength, which will in turn enhance power and vertical jumping performance. Even if you’re a two-foot jumper, focusing on one leg at a time like you do here will ensure that your dominant side isn’t compensating for your weaker leg during the movement.

The exercise is also a great option for those with lower-back issues, as the rear-foot elevated position requires a more upright torso than a standard squat. This prevents shearing forces on the lumbar spine, which are a common cause of injury in the classic back squat.

Step 1. Hold a dumbbell in each hand and stand lunge-length in front of a bench that’s 18–24 inches high. Reach back with one leg and rest the top of that foot on the bench.

Step 2. Take a deep breath, brace your core, and lower your body as far as you can, or until your rear knee is just above the floor (you should feel a stretch in the hip of the trailing leg). Keep your front heel grounded—don’t allow it to rise off the floor. Complete your reps on one side and then repeat on the other immediately.

Technique Tip: Determining how far out in front of you to place your front foot may require some trial and error. At the bottom of the motion, your front knee should be somewhere above your heel to mid foot. If your knee is behind your heel, your foot is too far forward; if it’s out over your toes, step out further. One trick to find the right distance is to start in the bottom position and adjust your stance from there. 

How to Use the Rear-Foot Elevated Split Squat

Timing: Perform split squats as one of the first two exercises in the strength portion of your workout. If done for low volume with no added resistance, it can also be done as part of a warmup prior to explosive jumps (see below for the isometric hold variation).

Sets/Reps: 3–4 sets of 5–8 reps, using a moderate weight. Because balance will be an issue with the staggered stance and rear foot elevated, you’ll have to go lighter than you would doing a standard split squat or lunge.

One training method Khan utilizes is a 30-second isometric hold in the bottom position of the split squat, followed by 5 reps; this is typically done with no added resistance, pumping the arms in a running motion on each rep. “The time hold creates endurance and strength in the quads and glutes,” says Khan.

Regression

The rear-foot elevated split squat can be a difficult exercise from a balance standpoint. The first time you try it, use no added resistance (bodyweight only) to practice the technique. If you’re unable to keep your balance, perform a standard split squat with your back foot on the floor (not elevated).

Progression

Holding the resistance in a higher position can increase the difficultly of the exercise and call on more core engagement. Examples of this include holding a kettlebell or dumbbell with both hands in the “goblet” position below your chin, or doing the movement with a barbell across your shoulders (the most advanced version). 

5) Kettlebell Hike Swing

(See 05:32 in the video.)

A variation on the basic kettlebell swing, the hike swing gets you used to exploding from a dead-stop position, so you learn to generate force quickly out of nowhere.

Step 1. Place a kettlebell on the floor and stand behind it with feet shoulder-width apart. Soften your knees.

Step 2. Hinge your hips back until you feel a stretch in your hamstrings. Your head, spine, and pelvis should form a long, straight line.

Step 3. Grasp the kettlebell and try to snap the handle in half. This should cause your shoulder blades to drive downward and your lats to tighten.

Step 4. Hike the kettlebell back between your legs until you feel your forearms contact your inner thighs.

Step 5. As soon as you feel your forearms touch your thighs, extend your hips explosively, as if you were standing up quickly and tall. Squeeze your glutes as you come up. Allow the power to raise the kettlebell up in front of you to shoulder level.

Step 6. Control the kettlebell on the way down and park it back on the floor. That’s one rep.

Technique Tip: This is an explosive lift, where the objective is to get the kettlebell moving upward as fast as possible. That said, keep the exercise safe, particularly for the lower back, by staying tight in the core and having your hips low coming off the floor—do lift the kettlebell with a rounded lower back, and avoid hyperextending your back at the top of each rep (i.e. don’t lean back).

How To Use the Kettlebell Hike Swing

Timing: Do hike swings early in your workout, before lower-body strength exercises.

Sets/Reps: 4 sets of 3–5 reps.

Regression

If starting and stopping each rep feels awkward, just work on the regular kettlebell swing instead, going for fluid reps (and higher reps, like 10 or more). If you’re not familiar with this move, we’ve got the ultimate guide to the kettlebell swing.

Progression

When you’ve got your explosive hip hinge mechanics down, a squat clean exercise can be a good next step. See our guide to the squat clean.

How to Dunk a Basketball

Once you’ve boosted your lower-body strength and power via the aforementioned five movements, it’s time to carry that newfound explosiveness over to the court—because if your goal is to jump higher, chances are dunking a basketball is high on your list of things you’d like to do with that skill.

These expert tips will help you with the finer points of dunking. Combine them with a respectable vertical leap, and you’ll be throwing one down soon enough.

7 Tips for Parlaying Better Hops into Monster Jams 

1) Wear the Right Shoes

Remember the Spike Lee (as Mars Blackmon) 1989 Nike commercial? (Yeah, we’re old too.) In reference to Michael Jordan’s epic hops, Lee exclaims, “It’s gotta be the shoes.” The line was a tad hyperbole, but it is worth putting some thought into your footwear.

A pair of relatively new basketball shoes (i.e. not Chuck Taylors) is a good choice for dunking, especially if you have unstable ankles; basketball shoes offer good lateral support, as opposed to running shoes, which can easily lead to a turned ankle.

“It doesn’t matter too much as long as they’re not sandals or boots, but I would say the lighter the shoe the better,” says Bobby Jones, a former NBA player and all-Pac-10 standout in college at the University of Washington, who currently plays professionally in Italy. (Visit Jones at BobbyRayJonesJr.com.)

Tyler Harris, a professional basketball player for the Sendai 89ers in Japan and brother of NBAer Tobias Harris, has one pair of shoes in particular he prefers to dunk in: “Kobe [Bryant] low-top Nikes are one of the best shoes to wear for dunking,” he says.

2) Warm Up Properly

Dunking (or attempting to dunk) is a high-impact, highly intense activity that deserves a sufficient warm-up prior to a throw-down session. Just as you would for a lifting workout, start your warmup with a few minutes of low-intensity cardio, then progress to more dynamic movements—dynamic stretching/mobility drills as well as jumping. Before attempting your first dunk, take a couple dry runs with no ball where you’re touching or grabbing the rim at the top.

“Warming up is very important for preventing injuries,” says Harris. “I would recommend warming up and stretching for at least 30 minutes before any basketball game or just practicing dunking the basketball.”

Harris recommends warmup and stretching drills (both dynamic and static) such as: jumping and touching the rim; high knees; ladder drills; lateral defensive slides, seated and standing hamstring stretches; seated straddle stretch; and Achilles stretches. Hold each stretch 15 seconds.

3) Decide If You’re a One-Foot or Two-Foot Jumper

Should you go off of one foot or two feet when dunking? That depends on what you’re more comfortable with as well as your athletic ability and coordination.

Jumping off one foot means you’ll be taking a running start and launching a few feet in front of the rim (since your momentum will carry you forward as well as up). When going off two feet, you won’t take a running start—more like a few hard steps and a power dribble. You’ll take off right in front of the rim and go straight vertical.

“When most people first start trying to dunk, it’s usually off one leg,” says Jones. “You’re banking on your speed, so this means you want to have a running start to gain momentum. If you want to dunk off two, that requires more athletic ability, more coordination, and using the power dribble to gain momentum. If you have a nice set of calves and a big butt, this might be the way to go.”

4) Dunk One-Handed, if Possible

It takes a higher vertical leap to get both hands up to the rim versus just one (and don’t forget, you’ll be holding a basketball as well), so if you’re cutting it close, try for a one-handed jam. Being able to palm the ball will obviously help, but it’s not totally necessary; just make sure you keep the ball in both hands until you leave the floor so you don’t lose it.

“Dunking with one hand is definitely easier than two,” says Jones. “It’s one less thing to worry about, so you can focus better on the task at hand.” When the time comes that you’re dunking easily, then you can start dunking with two hands for more authority.

5) Approach the Rim from the Baseline

When your goal is simply to throw one down, you want to be as focused as possible on your target: the rim. Because of this, Jones recommends coming in from the side (along the baseline) instead of straight on.

“Starting from the mid baseline or corner to dunk, I think, gives your mind an easier target and is less distracting,” he says. “That way, you can just focus on getting as high as you can, sort of like doing the long jump. When you’re trying to dunk straight on, you visually see the entire basket and might get distracted, scared, and lose focus.”

6) Take Plenty of Rest Between Dunks

Giving yourself the best chance to throw one down requires you to be as fresh and explosive as possible. You want full rest between dunking attempts—just as you would when maxing out on a big lift like a squat, deadlift, or bench press. After each dunk attempt, take at least a minute or two to rest and recover.

7) When Performance Diminishes, Call it a Day

In any power and strength activity, there comes a point of diminishing results. This is why powerlifters typically don’t do more than three heavy sets or one-rep max (1RM) attempts for any lift in a given session.

Dunking isn’t much different. You’ll likely find yourself getting slightly higher with each attempt at first, but before long, fatigue will set in and your vertical leap will decrease. At this point, it’s a good idea to end the session, rather than try to push through and force yourself to jump higher. It’s an indication that your nervous system has mustered all the energy it has to help you jump, and you need to let it rest. Give your legs a couple days’ off, then come back again and try.

The post How To Jump Higher: 5 Exercises To Improve Your Vertical appeared first on Onnit Academy.